Consistent grease with molybdenum disulfide (MoS2) for constant velocity joints.

Recommended for application in constant velocity joints, assemblies and bearings of vehicles as well as industrial equipment. Contains pure superfine molybdenum disulfide (MoS2) due to which it effectively protects assemblies and bearings operating under peak and/or alternating loads.

Advantages

• Special grease for constant velocity joints.
• Effectively protects assemblies and bearings operating under peak and/or alternating loads.
• Possesses high mechanical and chemical stability, retains its protective and anti-wear properties even after durable mechanical and thermal loads.
• Due to strong adhesion, remains on the lubricated surfaces even under the action of vibrations and high rotation speeds.
• Water-resistant and can be used in assemblies operating in contact with water.
• Forms good isolation and prevents contamination of bearings.

Application instructions

Using grease filling gun.

Add the grease through a filling gun until it goes out of the clearances of the lubricated joint.

Manual application.

Remove the old grease and fill 1/2 of the bearing (assembly) volume with VERYLUBE Lithium Grease for CV Joints.

Note

Compatible with automotive and industrial lithium greases of all types, and can be mixed with them in any proportion.

Applied to assemblies with the rotation speed of up to 10,000 rpm.

Requirements

Package

450ml Art. XB 30051 filling gun cartridge.